LaCrosse V8-5.3L (2008)
3. Connect the side impact sensor connector (4).
4. Install the CPA (3) to the side impact sensor connector.
5. Install the side impact sensor (1) to the door (4).
Notice: Refer to Fastener Notice.
6. Tightening the side impact sensor bolts (2).
Tighten the bolts to 10 N.m (89 lb in).
7. Install the water deflector to the door.
8. Enable the SIR system. Refer to SIR Disabling and Enabling (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air
Bag(s) Arming and Disarming/Service and Repair).
