LaCrosse V8-5.3L (2008)
Positive: Service and Repair
Battery Positive and Negative Cable Replacement (LS4)
Removal Procedure
Important: When replacing battery cables be sure to use replacement cables that are the same type, gage, and length.
1. Disconnect the negative battery cable (3). Refer to Battery Negative Cable Disconnection and Connection (LS4) (See: Service and Repair).
2. Open the positive battery cable terminal lead cover (1).
3. Loosen the positive battery cable terminal lead nut
4. Remove the positive battery cable terminal from the battery.
5. Disconnect the instrument panel (I/P) harness electrical connector (2) from the battery current sensor.
6. Disconnect the battery cable connector from the I/P harness electrical connector.
