LaCrosse V8-5.3L (2008)
Battery Current Sensor: Service and Repair
Battery Current Sensor Replacement (LS4)
Removal Procedure
1. Disconnect the instrument panel (I/P) harness electrical connector (2) from the battery current sensor.
2. Remove the positive and negative battery cable. Refer to Battery Positive and Negative Cable Replacement (LS4) (See: Battery/Battery
Cable/Positive/Service and Repair).
3. Cut the tie straps and electrical tape attaching the battery current sensor to the positive battery cable.
4. Squeeze the battery cable branches together.
Important: Note the position of the battery current sensor prior to removal.
5. Slide the battery current sensor (1) off of the battery cable.