LaCrosse V8-5.3L (2008)
Ignition Switch Lock Cylinder: Removal and Replacement
Ignition Lock Cylinder Case Replacement
Ignition Lock Cylinder Case Replacement
Removal Procedure
Caution: Refer to SIR Caution (See: Restraint Systems/Service Precautions/Technician Safety Information/SIR Caution).
1. Disable the SIR system. Refer to SIR Disabling and Enabling (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air
Bag(s) Arming and Disarming/Service and Repair).
2. Remove the ignition lock cylinder. Refer to Ignition Lock Cylinder Replacement (See: Ignition Lock Cylinder Replacement).
3. Remove the ignition switch. Refer to Ignition and Start Switch Replacement (See: Service and Repair).
4. Remove the steering column tilt head components. Refer to Turn Signal Cancel Cam and Steering Shaft Upper Bearing Spring Replacement (See:
Steering and Suspension/Steering/Steering Column/Service and Repair/Turn Signal Cancel Cam and Steering Shaft Upper Bearing Spring
Replacement).
5. Remove the turn signal switch housing. Refer to Turn Signal Switch Housing Replacement (See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Turn Signal Switch Housing Replacement).
6. Remove the turn signal and multifunction switch assembly only. Refer to Turn Signal Multifunction Switch Replacement (See: Steering and
Suspension/Steering/Steering Column/Service and Repair/Turn Signal Multifunction Switch Replacement).