LaCrosse V8-5.3L (2008)
1. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement (See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Steering Column Trim Covers Replacement).
2. Install the ignition lock cylinder by performing the following procedure:
1. Align the positioning locking tab slot on the ignition lock cylinder case to the positioning tab on the ignition lock cylinder.
2. Push the lock cylinder in until the tab locks in the ignition lock cylinder case.
3. Enable the SIR system. Refer to SIR Disabling and Enabling (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air
Bag(s) Arming and Disarming/Service and Repair).
4. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (L26) (See: Battery/Battery Cable/Service and
Repair)Battery Negative Cable Disconnection and Connection (LY7) (See: Battery/Battery Cable/Service and Repair)Battery Negative Cable
Disconnection and Connection (LS4) (See: Battery/Battery Cable/Service and Repair).
5. Perform the Passlock Learn procedure. Refer to Immobilizer System Component Programming (Canada) (See: Testing and
Inspection/Programming and Relearning)Immobilizer System Component Programming (North America except Canada) (See: Testing and
Inspection/Programming and Relearning).
