LaCrosse V8-5.3L (2008)
1. Install the backing plate (2) and the wheel bearing hub (3).
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
2. Install the wheel bearing/hub-to-knuckle bolts.
Tighten the bolts to 75 N.m (55 lb ft).
Rear Wheel Speed Sensors
3. Install the ABS electrical connector to the wheel speed sensor (1), if equipped.
4. Install the brake rotor and caliper. Refer to Rear Brake Rotor Replacement (See: Brakes and Traction Control/Disc Brake System/Brake
Rotor/Disc/Service and Repair/Removal and Replacement/Rear Brake Rotor Replacement).
5. Install the tires and wheels. Refer to Tire and Wheel Removal and Installation (See: Service and Repair).
6. Lower the vehicle.
