LaCrosse V8-5.3L (2008)
Flex Plate: Service and Repair
Engine Flywheel Replacement
Removal Procedure
1. Remove the automatic transmission. Refer to Transmission Replacement (See: Automatic Transmission/Transaxle/Service and Repair/Removal
and Replacement).
2. Remove the flywheel bolts and flywheel.
3. Clean and inspect the engine flywheel. Refer to Engine Flywheel Cleaning and Inspection (See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Overhaul).
Installation Procedure
Important: The flywheel does not use a locating pin for alignment and will not initially seat against the crankshaft flange or spacer if
applicable, but will be pulled onto the crankshaft by the engine flywheel bolts. This procedure requires a 3-stage tightening process.
