LaCrosse FWD L4-2.4L (2011)
4. Adjust the door striker up or down and inboard or outboard as required.
5. Move the striker to eliminate drag on the striker and door latch and to achieve proper door position within door opening. Start with up/down
position, then position the striker to achieve proper alignment to the door opening. Set the in/out adjustment for proper door seal engagement
ensuring that the door closing efforts are correct.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
6. Adjust the striker and add spacers as required.
Tighten the screws to 24 Nm (18 lb ft).
7. Inspect the door for proper operation.
8. Close the door.
