buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Circuit Protection - Circuit Breakers|Page 8956 > < Circuit Protection - Circuit Breakers|Page 8954
Page 1
background image

Sun Visor: Testing and Inspection

Rear Window Inside Sunshade Malfunction

Diagnostic Instructions

*

Perform the Diagnostic System Check - Vehicle   (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System
Check - Vehicle) prior to using this diagnostic procedure.

*

Review Strategy Based Diagnosis   (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an
overview of the diagnostic approach.

*

Diagnostic Procedure Instructions   (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure Instructions)
provides an overview of each diagnostic category.

Diagnostic Fault Information

Circuit/System Description

The rear window sunshade control module contains the logic for extending or retracting the sunshade based on inputs received from the sunshade switch.
The switch is a momentary type, and is located in the center console multifunction switch. The module activates the sunshade motor based on the inputs
received from the switch. When the ignition switch is in the ON position, voltage is applied to the rear window sunshade control module via the Ignition
Main relay. The rear window sunshade control module controls the rear window sunshade motor direction by changing the polarity of the applied
voltage. If the ignition switch is turned to the OFF position while the sunshade is moving, the module enters a "Standby" mode, and the shade will
complete its cycle. The module will remain in the "Standby" mode and the shade will remain in the position it was in when movement ceased, until the
module receives another switch activation input. Movement will then resume, but in the opposite direction from the last activation.

The sunshade motor assembly contains the reversible DC drive motor and the gear train used to move the shade material to the desired position. The
motor also contains a positive temperature coefficient (PTC) thermal circuit breaker to protect the system from an overload.

Reference Information
Schematic Reference

*

Sunshade Schematics   (See: Diagrams/Electrical Diagrams)

*

Power Moding Schematics   (See: Diagrams/Electrical Diagrams/Starting and Charging/Power and Ground Distribution/System Diagram/Power
Moding Schematics)

*

Power Distribution Schematics   (See: Diagrams/Electrical Diagrams/Starting and Charging/Power and Ground Distribution/System
Diagram/Power Distribution Schematics)

Connector End View Reference

Component Connector End Views   (See: Diagrams/Connector Views/Connector End Views By Name)
Description and Operation

Rear Window Inside Sunshade Description and Operation   (See: Description and Operation)
Electrical Information Reference

Circuit Protection - Circuit Breakers|Page 8956 > < Circuit Protection - Circuit Breakers|Page 8954