LaCrosse FWD L4-2.4L (2011)
Keyless Entry Transmitter: Diagnostic Aids
Yazaki Connectors (2-Way)
Yazaki Connectors (2-Way)
Special Tools
*
EL-38125-580 - Terminal Release Tool Kit
*
J-38125-553 - Terminal Release Tool
For equivalent regional tools, refer to Special Tools (See: Power and Ground Distribution/Tools and Equipment).
Terminal Removal Procedure
1. Disconnect the connector from the component.
2. Insert a small flat-blade tool in the slot below the front loaded terminal position assurance (TPA) and pry up.
3. Remove the TPA by pulling it out of the connector.
4. Push the wire side of the terminal that is being removed toward the connector and hold it in position.
