LaCrosse FWD L4-2.4L (2011)
4. Remove the oil level indicator tube bolt.
5. Remove the oil level indicator tube.
6. Remove the oil level indicator tube O-ring seals, if necessary.
7. Disconnect electrical connector as needed.
8. Disconnect the brake vacuum pump connectors.
Installation Procedure
1. Install NEW oil level indicator tube O-ring seals, if necessary.
2. Install the oil level indicator tube.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the oil level indicator tube bolt and tighten to 10 Nm (89 lb in).
