LaCrosse FWD L4-2.4L (2011)
4. Push the front suspension strut inward and install the front suspension strut bolt in the bottom hole of the knuckle. This will hold the knuckle in
place to allow the lower hole to be enlarged.
5. Using a file, enlarge the outer flange hole (1) to match that of the inner flange hole.
6. Remove the lower front suspension strut bolt from the knuckle.
7. Install the lower front suspension strut bolt and tighten both bolts. Refer to Strut Assembly Replacement (GNA) (See: Steering and
Suspension/Suspension/Suspension Strut / Shock Absorber/Service and Repair/Front Suspension/Strut Assembly Replacement (GNA))
Note: Move the top of the wheel (1) in or out to the proper specifications.
4. Adjust the front camber to specification. Refer to Wheel Alignment Specifications (See: Specifications/Wheel Alignment Specifications).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
5. Install the strut to knuckle nuts (1) and tighten to 120 Nm (89 lb ft).
6. Verify the front camber adjustment specification and readjust if needed.
