LaCrosse FWD L4-2.4L (2011)
Fuel Level Sensor: Service and Repair
Fuel Level Sensor Replacement
Removal Procedure
Warning
Fuel Vapors can collect while servicing fuel system parts in enclosed areas such as a trunk. To reduce the risk of fire and increased exposure to vapors:
*
Use forced air ventilation such as a fan set outside of the trunk.
*
Plug or cap any fuel system openings in order to reduce fuel vapor formation.
*
Clean up any spilled fuel immediately.
*
Avoid sparks and any source of ignition.
*
Use signs to alert others in the work area that fuel system work is in process.
1. Remove the fuel tank pump module. Refer to Fuel Tank Fuel Pump Module Replacement (NT7) (See: Fuel Delivery and Air Induction/Fuel
Pump/Service and Repair/Fuel Tank Fuel Pump Module Replacement (NT7))Fuel Tank Fuel Pump Module Replacement (NU6) (See: Fuel
Delivery and Air Induction/Fuel Pump/Service and Repair/Fuel Tank Fuel Pump Module Replacement (NU6)).
2. Using two flat-bladed tools, carefully pull both locking tabs (1) outward while simultaneously lifting the level sensor.
