LaCrosse FWD L4-2.4L (2011)
Alignment: Service and Repair
Rear Toe Adjustment
Rear Toe Adjustment
1. Measure the alignment on an alignment rack. Refer to Wheel Alignment Measurement (See: Wheel Alignment Measurement).
Note: Do not tighten the new fasteners yet in order to allow for movement.
2. Rotate the cam nut in order to adjust the toe angle. Refer to Wheel Alignment Specifications (See: Specifications/Wheel Alignment
Specifications).
3. Hand tighten the cam bolt, but do not tighten the bolt to the specification yet.
4. Reinspect the rear toe angle and adjust as necessary.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
5. Hold the cam nut and tighten the cam bolt.
150 Nm (111 lb ft)
6. Repeat the procedure for the other rear wheel.
7. Lower the vehicle.