LaCrosse FWD L4-2.4L (2011)
Note: The bushing can be damaged if it is pressed to deep. The bushing should be pressed so that the flange on the bushing is resting on the rear
suspension support.
2. Position the rear bushings in the frame.
Note: Apply a small amount of silicone grease on the bushing prior to installing.
3. Use the DT-49126-10 - tool (1), CH-50196 - tool (3) and the CH-49233 - tool (2), install the bushing.
4. With the aid of an assistant, position the rear support onto the transmission jack and firmly secure the support to the jack with straps.
5. Position the rear support assembly to the vehicle.