LaCrosse FWD V6-3.0L (2010)
15. Remove the 4 rear support to body bolts (1).
16. Remove the rear support assembly from the vehicle.
17. Remove the inner fastener from adjustments links. Refer to Adjust Link Replacement (GNE) (See: Steering and Suspension/Steering/Tie
Rod/Service and Repair/Rear Suspension/Adjust Link Replacement (GNE))Adjust Link Replacement (GNC) (See: Steering and
Suspension/Steering/Tie Rod/Service and Repair/Rear Suspension/Adjust Link Replacement (GNC)).
18. With the aid of an assistant, remove the rear support from the transmission jack and place it on the floor.
Installation Procedure
Note: When transferring any suspension components, refer to each suspension component replacement procedure for the proper torque
specifications.
1. With the aid of an assistant, position the rear support onto the transmission jack and firmly secure the support to the jack with straps.
2. Install the inner fastener to adjustments links. Refer to Adjust Link Replacement (GNE) (See: Steering and Suspension/Steering/Tie Rod/Service
and Repair/Rear Suspension/Adjust Link Replacement (GNE))Adjust Link Replacement (GNC) (See: Steering and Suspension/Steering/Tie
Rod/Service and Repair/Rear Suspension/Adjust Link Replacement (GNC)).
3. Carefully lower the vehicle until contacts the frame assembly and is correctly positioned within the spray painted areas.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).