LaCrosse FWD V6-3.0L (2010)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the bolts (1) to the left and right side of the rails.
Tighten the bolts to 2.5 Nm (22 lb in).
5. Install the rear crossmember.
6. Install the bolts (1) to the left and right side of the crossmember.
Tighten the bolts to 2.5 Nm (22 lb in).
7. Remove the sunshade pin.
8. Inspect sunshade for proper operation.
9. Install the headlining. Refer to Headlining Trim Panel Replacement (with Sunroof) (See: Interior Moulding / Trim/Headliner/Service and
Repair/Headlining Trim Panel Replacement (With Sunroof))Headlining Trim Panel Replacement (without Sunroof) (See: Interior Moulding /
Trim/Headliner/Service and Repair/Headlining Trim Panel Replacement (Without Sunroof)).
