LaCrosse FWD V6-3.0L (2010)
5. Install the power brake booster vacuum rear pipe to the retainers (1) on the right front brake pipe.
6. Install the power brake booster vacuum rear pipe to the retainer (2) on the dash panel.
7. Install the power brake booster vacuum rear pipe to the retainer (1) on the dash panel.
8. Install the power brake booster vacuum rear pipe vacuum sensor and check valve (2) to the power vacuum brake booster.
9. Connect the power brake booster vacuum sensor electrical connector.
10. Install the power brake booster vacuum pipe. Refer to Power Brake Booster Vacuum Pipe Replacement (2.4L) (See: Power Brake Booster
Vacuum Pipe Replacement)Power Brake Booster Vacuum Pipe Replacement (3.0L, 3.6L) (See: Power Brake Booster Vacuum Pipe Replacement
).
