LaCrosse FWD V6-3.0L (2010)
Caution: Refer to Torque Reaction Against Timing Drive Chain Caution (See: Timing Components/Service Precautions).
Note:
*
Use an open-end wrench at the camshaft hex to prevent camshaft/engine rotation.
*
DO NOT remove the camshaft position actuator bolt at this time.
8. Loosen the camshaft position actuator bolt.
Note: Ensure that the tips of the EN-46313 - tool are fully engaged into the timing chain.
9. Install the EN-46313 - tool in order to retain the timing chain.
Firmly tighten the EN-46313 - tool nuts.
Note: Ensure that the camshaft timing chain and the camshaft position actuators are marked for proper assembly.
10. Mark the timing chain and the respective locations on camshaft position actuators (15-18).
