LaCrosse FWD V6-3.0L (2010)
Valve Cover: Service and Repair
Camshaft Cover Replacement - Left Side
Camshaft Cover Replacement - Left Side
Special Tools
EN-46101 - Spark Plug Tube Seal Guide
For equivalent regional tools, refer to Special Tools (See: Tools and Equipment/Special Tools).
Removal Procedure
1. Remove the ignition coils. Refer to Ignition Coil Replacement - Bank 2 (See: Powertrain Management/Ignition System/Ignition Coil/Service and
Repair/Ignition Coil Replacement - Bank 2).
2. Disconnect and remove the engine harness from the camshaft cover.
3. Remove the intake manifold. Refer to Intake Manifold Replacement (LLT) (See: Intake Manifold/Service and Repair/Intake Manifold
Replacement)Intake Manifold Replacement (LF1) (See: Intake Manifold/Service and Repair/Intake Manifold Replacement).
4. Remove the power steering reservoir bracket and reposition without disconnecting the hoses. Refer to Power Steering Fluid Reservoir Bracket
Replacement (V6) (See: Steering and Suspension/Steering/Power Steering/Power Steering Fluid Reservoir/Service and Repair/Power Steering
Fluid Reservoir Bracket Replacement).
5. Remove the left camshaft cover bolts.
6. Remove the left camshaft cover from the left cylinder head.
7. Clean the mating surfaces of the cylinder head and the camshaft cover. Refer to Camshaft Cover Cleaning and Inspection (See: Service and
Repair/Overhaul/80. Camshaft Cover Cleaning and Inspection).