LaCrosse FWD V6-3.0L (2010)
11. Remove the camshaft position actuator bolt.
12. Remove the camshafts. Refer to Camshaft Removal - Left Side (See: Service and Repair/Overhaul/35. Camshaft Removal - Left Side).
Installation Procedure
Note:
*
Ensure that the marks on the camshaft position actuator and the timing chain (1-4) are aligned.
*
DO NOT tighten the camshaft position actuator bolt at this time.
1. Locate the camshafts to the cylinder head and assemble the camshaft actuators to the camshafts.
2. Install the camshafts and the camshaft bearing caps. Refer to Camshaft Installation - Left Side (See: Service and Repair/Overhaul/104. Camshaft
Installation - Left Side).
3. Remove the EN-46108 - tool.
Caution: Refer to Torque Reaction Against Timing Drive Chain Caution (See: Timing Components/Service Precautions).
