LaCrosse FWD V6-3.0L (2010)
Hose Replacement)
*
Front Brake Caliper Replacement (See: Brakes and Traction Control/Disc Brake System/Brake Caliper/Service and Repair/Front Brake
Caliper Replacement)
*
Rear Brake Caliper Replacement (See: Brakes and Traction Control/Disc Brake System/Brake Caliper/Service and Repair/Rear Brake
Caliper Replacement)
*
Electronic Brake and Traction Control Module with Brake Pressure Modulator Valve Replacement (See: Brakes and Traction
Control/Antilock Brakes / Traction Control Systems/Electronic Brake Control Module/Service and Repair/Electronic Brake and Traction
Control Module With Brake Pressure Modulator Valve Replacement)
4. If the brake fluid was NOT contaminated with an oil-based or a silicone-based substance, but WAS contaminated with water or dirt, rust,
corrosion, and/or brake dust, replace the brake master cylinder reservoir cap diaphragm which may have allowed the moisture or particles to enter
the hydraulic system.
5. Fill the brake master cylinder reservoir to the maximum-fill level with GM approve or equivalent DOT-3 brake fluid from a clean, sealed brake
fluid container.
6. Pressure bleed the hydraulic brake system; begin the procedure with the pressure bleeder reservoir filled to the maximum-fill level with the correct
brake fluid as indicated. Refer to Hydraulic Brake System Bleeding (Manual) (See: )Hydraulic Brake System Bleeding (Pressure) (See: ).