LaCrosse FWD V6-3.0L (2010)
Fuse Block: Diagnostic Aids
Delphi Connectors (Push to Seat)
Delphi Connectors (Push To Seat)
Special Tools
For equivalent regional tools, refer to Special Tools (See: Tools and Equipment).
Terminal Removal
Follow the steps below in order to repair push to seat connectors.
1. Remove the terminal position assurance (TPA) device, the connector position assurance (CPA) device, and/or the secondary lock.
2. Separate the connector halves (1).
3. Use the proper pick or removal tool (1) in order to release the terminal.
4. Gently pull the cable and the terminal (2) out of the back of the connector.
5. Re-form the locking device if you are going to reuse the terminal (1).
6. To repair the terminal, refer to Terminal Repair.
Reinstalling Terminal
1. In order to reuse a terminal or lead assembly, refer to Wiring Repairs (See: Testing and Inspection/Component Tests and General
Diagnostics/Wiring Repairs/Wiring Repairs).