LaCrosse FWD V6-3.0L (2010)
Caution: Refer to Torque Reaction Against Timing Drive Chain Caution (See: Timing Components/Service Precautions).
Note:
*
Use an open-end wrench at the camshaft hex to prevent camshaft/engine rotation.
*
DO NOT remove the camshaft position actuator bolt at this time.
8. Loosen the camshaft position actuator bolt.
Note: Ensure that the tips of the EN-46313 - tool are fully engaged into the timing chain.
9. Install the EN-46313 - tool in order to retain the timing chain.
Firmly tighten the EN-46313 - tool nuts.
Note: Ensure that the camshaft timing chain and the camshaft position actuators are marked for proper assembly.
10. Mark the timing chain and the respective locations on the camshaft position actuators (1-4).
