LaCrosse FWD V6-3.0L (2010)
29. Slide the camshaft position actuator forward and off the end of the intake camshaft. The slot in the EN49982-1 - retainer will allow the tool to
move forward enough to disengage the camshaft position actuator from the front of the camshaft. Remove the plastic thrust washer when removing
the camshaft position actuator from the end of the camshaft.
30. Tilt the camshaft position actuator forward and out/away from the engine.
Note: DO NOT remove the EN49982 - retainers. They are holding the cam chains to maintain their properly-timed positions.
31. Allow the chain to rest on the EN49982-1 - retainer and EN49982-2 - retainer in position during service.
Installation Procedure
