LaCrosse FWD V6-3.0L (2010)
8. Using a 20 mm wrench on the cast hexagonal portion of the exhaust camshaft, rotate the camshaft clockwise while pulling up on the handle of the
EN49982-2 - retainer.
9. Remove EN49982-2 retainer.
10. Release the pressure on the wrench. The timing chain should now be tight and should lose the slack the wedge was providing.
Note: Double-check the marks on the camshaft position actuators and chains to ensure they are correct.
11. Torque one or both camshaft position actuator retaining bolts to 58 Nm (43 lb ft).
12. Unscrew the wingnut on EN49982-1 - retainer to release timing chain, and then remove EN49982-1 - retainer from the front cover by unscrewing
the thumbscrew (2).
