LaCrosse FWD V6-3.0L (2010)
20. With the locking lever in the 90 degree position and the male connector body connected, it can be slid inward for assembly.
21. Move the lever into the locked position or in the assembled position. This will pull the male connector down into the female connector.
Terminated Lead Repair
1. Remove the terminal.
2. Find the appropriate terminated lead.
3. Use the appropriate splice sleeves depending on the gauge size.
4. Refer to Splicing Copper Wire Using Splice Sleeves (See: Testing and Inspection/Component Tests and General Diagnostics/Wiring
Repairs/Splicing Copper Wire Using Splice Sleeves).