LaCrosse FWD V6-3.0L (2010)
Wheel Speed Sensor: Service and Repair
Rear Wheel Speed Sensor Replacement (H-Arm)
Rear Wheel Speed Sensor Replacement (H-Arm)
Removal Procedure
Warning: Refer to Brake Dust Warning (See: Brakes and Traction Control/Service Precautions/Technician Safety Information/Brake Dust Warning)
.
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair
).
3. Clean the wheel speed sensor mounting area on the suspension knuckle of any accumulated dirt and debris.
4. Remove the wheel speed sensor bolt (1).