LaCrosse FWD V6-3.0L (2010)
Installation Procedure
1. If you are installing a new ignition lock cylinder, code the lock cylinder. Refer to Lock Cylinder Coding - Ignition (See: Body and
Frame/Locks/Service and Repair/Lock Cylinder Coding - Ignition).
2. Turn the key to the RUN position and insert ignition lock cylinder into the lock housing.
3. Turn the key to the LOCK position and remove the key from the ignition lock cylinder.
4. Install the steering column trim covers. Refer to Steering Column Trim Cover Replacement (See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Steering Column Trim Cover Replacement).
5. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and Charging/Battery/Battery
Cable/Negative/Service and Repair/Battery Negative Cable Disconnection and Connection).