LaCrosse FWD V6-3.0L (2010)
Note: Be careful not to angle or rock the EL-38125-21 tool when inserting it into the connector or the tool may break.
6. Insert the EL-38125-21 tool into the round canal between the terminals cavities at the front of the connector.
7. While holding the removal tool in place, gently pull the wire out of the back of the connector. Always remember never use force when pulling a
terminal out of a connector.
Terminated Lead Repair
1. Remove the terminal.
2. Find the appropriate terminated lead.
3. Use the appropriate splice sleeves depending on the gauge size.
4. Refer to Splicing Copper Wire Using Splice Sleeves (See: Testing and Inspection/Component Tests and General Diagnostics/Wiring
Repairs/Splicing Copper Wire Using Splice Sleeves).
