LaCrosse FWD V6-3.0L (2010)
Stabilizer Bushing: Service and Repair
Stabilizer Shaft Insulator Replacement (GNC)
Stabilizer Shaft Insulator Replacement (GNC)
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Wheels and Tires/Vehicle Lifting/Service and Repair).
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
3. Remove the rear muffler assembly. Refer to Exhaust Muffler Replacement (See: Engine, Cooling and Exhaust/Exhaust System/Muffler/Service
and Repair).
4. Remove the rear suspension control arm bolts from the body. Refer to Rear Suspension Control Arm Replacement (See: Control Arm/Service
and Repair/Rear Suspension/Rear Suspension Control Arm Replacement).
5. Remove the rear spring. Refer to Rear Spring, Insulator, and Jounce Bumper Replacement (GNE) (See: Suspension Travel Bumper/Service and
Repair/Rear Spring, Insulator, and Jounce Bumper Replacement (GNE))Rear Spring, Insulator, and Jounce Bumper Replacement (GNC) (See:
Suspension Travel Bumper/Service and Repair/Rear Spring, Insulator, and Jounce Bumper Replacement (GNC)).
6. Remove the park brake cables from the trailing arms. Refer to Parking Brake Rear Cable Replacement (J71) (See: Brakes and Traction
Control/Parking Brake System/Parking Brake Cable/Service and Repair/Removal and Replacement).
7. Without disconnecting the hydraulic brake hose from the caliper, remove and support the brake calliper. Refer to Rear Brake Caliper Replacement
(See: Brakes and Traction Control/Disc Brake System/Brake Caliper/Service and Repair/Rear Brake Caliper Replacement).
8. Remove the lower shock absorber fasteners. Refer to Shock Absorber Replacement (GNC) (See: Suspension Strut / Shock Absorber/Service and
Repair/Rear Suspension Shock Absorber/Shock Absorber Replacement (GNC))Shock Absorber Replacement (GNE) (See: Suspension Strut /
Shock Absorber/Service and Repair/Rear Suspension Shock Absorber/Shock Absorber Replacement (GNE)).
9. Support and secure adjustable jack stands to the rear support.
10. Mark up support position to body with spray paint.
11. Remove the mounting bolts (1) for the support. Refer to Rear Suspension Support Replacement (GNE) (See: Cross-Member/Rear
Cross-Member/Service and Repair)Rear Suspension Support Replacement (GNC) (See: Cross-Member/Rear Cross-Member/Service and Repair).
12. Lower the support enough to gain access to the rear stabilizer shaft insulator clamps mounting bolts.