LaCrosse FWD V6-3.0L (2010)
Shift Solenoid: Diagnostic Aids
Delphi Connectors (Micro .64)
Delphi Connectors (Micro.64)
Special Tools
For equivalent regional tools, refer to Special Tools (See: Power and Ground Distribution/Tools and Equipment).
Removal Procedure
Follow the steps below in order to remove terminals from Micro.64 connectors.
1. Locate the lever lock on the wire dress cover. While depressing the lock, pull the lever over and past the lock. The lever lock may be located on
the top or sides of the wire dress cover.
View of a typical Micro 64 connector.
