LaCrosse FWD V6-3.0L (2010)
Shift Solenoid: Diagnostic Aids
AFL/EPC Connectors
AFL/EPC Connectors
Special Tools
For equivalent regional tools, refer to Special Tools (See: Power and Ground Distribution/Tools and Equipment).
Removal Procedure
Follow the steps below in order to remove terminals from the connector.
1. For connectors with a bolt in the dress cover, turn the bolt counterclockwise to remove the connector from the component.
2. Locate the connector position assurance (CPA) on the top of the wire dress cover. Slide the CPA forward.
