LaCrosse FWD V6-3.0L (2010)
7. Pressing the EL-38125-12A tool in the release cavity of the terminal you are removing, gently pull the wire out of the back of the connector.
Always remember never use force when pulling a terminal out of a connector.
Terminated Lead Repair
1. Remove the terminal.
2. Find the appropriate terminated lead.
3. Use the appropriate splice sleeves depending on the gauge size.
4. Refer to Splicing Copper Wire Using Splice Sleeves (See: Testing and Inspection/Component Tests and General Diagnostics/Wiring
Repairs/Splicing Copper Wire Using Splice Sleeves).
