LaCrosse FWD V6-3.0L (2010)
Transmission Mount: Service and Repair
Transmission Rear Mount Bracket Replacement
Transmission Rear Mount Bracket Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the left tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
3. Using a suitable jack stand, support the rear of the powertrain.
4. Remove the transmission mount to bracket through bolt (1).
5. Remove the transaxle brace bolt (1), then loosen bolt (2) until it no longer engages the transaxle.
6. Remove the transaxle brace (3) with bolt (2) still retained in the brace.