LaCrosse FWD V6-3.0L (2010)
4. Ensure that the TPA is in the proper position to remove the terminals.
5. While pushing the terminal forward, insert the EL-38125-24 in the release cavity above the terminal you are removing, gently pull the wire out of
the back of the connector. Always remember never use force when pulling a terminal out of a connector.
Terminated Lead Repair
1. Remove the terminal.
2. Find the appropriate terminated lead.
3. Use the appropriate splice sleeves depending on the gauge size.
4. Refer to Splicing Copper Wire Using Splice Sleeves (See: Testing and Inspection/Component Tests and General Diagnostics/Wiring
Repairs/Splicing Copper Wire Using Splice Sleeves).