LeSabre V6-181 3.0L (1986)
Service Port HVAC: Technical Service Bulletins
A/C System - Refrigerant Loss Prevention
Bulletin:
91-1-4
Date:
April '91
Ref. No.: 91-150-1
Corp. Ref. No.: 971202R
SUBJECT:
A/C REFRIGERANT LOSS DUE TO LOOSE OR MISSING ACCESS FITTING CAPS
MODELS AFFECTED: ALL 1980-91 BUICK MODELS
This bulletin is being revised to add 1990-91 model years and to update a discontinued part number for high side valve-cap and seal. Please discard
Bulletin No. 89-1-7 and replace it with this bulletin.
All GM air coriditioning Hi side and Low side access fittings are supplied with a black plastic cap and seal assembly which provides the primary
refrigerant seal for the service fittings.
If the cap and seal assembly is missing or loose, a significant amount of refrigerant may leak through the valve core located in the access fitting, which
could result in poor A/C performance or failure.
When servicing any vehicle's A/C system, make sure all access fitting cap seals (refer to Figure 1) are in place and tight. Caps should be threaded on
until contact with the "O" ring seal is made and then tightened another 1/4 - 1/2 turn to ensure proper sealing.
High Side
Low Side
Valve - Cap and Seal
Valve - Cap and Seal
P/N 52451233
P/N 6551640
Parts are currently available from GMSPO.
