buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Steering/Suspension - Wheel Alignment Specifications|Page 845 > < Steering/Suspension - Wheel Alignment Specifications|Page 843
Page 1
background image

Alignment: Technical Service Bulletins
Steering - Lead or Pull Recommendations

Bulletin:

87-3-12

Date:

Sept., '87

Ref.No.  87-175-3

Corp. Ref. No.  793103
SUBJECT:

STEERING LEAD OR PULL CONDITION

MODELS AFFECTED: 1985-87 ELECTRA/PARK AVENUE 1986-87 LESABRES
It has been reported that some dealers may be changing factory caster settings in an attempt to repair a lead or pull condition. Normally, caster should not
be altered. If a lead or pull condition is encountered, the front wheel drive diagnosis chart for radial tire lead/pull in Section 3 of the Service Manual
should be used. As noted in the chart, camber should be adjusted, if necessary. Camber is an easier adjustment, and is more effective than caster in
repairing lead and pull. Any small changes to camber should not significantly affect tire wear.

Steering/Suspension - Wheel Alignment Specifications|Page 845 > < Steering/Suspension - Wheel Alignment Specifications|Page 843