LeSabre V6-181 3.0L (1986)
Ball Joint: Technical Service Bulletins
Ball Joint - Separation Tool
Bulletin 87-3-5
Date
Jan. '87
Ref. No. 87-054-3
SUBJECT:
Separating Front Suspension Ball Joint from Knuckle
MODEL:
1986 and 1987 Electra, Park Avenue, and LeSabre with Antilock Brakes (JM4)
1.J36226 BALL JOINT SEPARATOR
A new essential Ball Joint Separating Tool J 36226 has been developed to prevent damage to the drive axle toothed sensor rings and to aid ball joint
separation.
This new tool J-36226 should be used in place of the existing Ball Joint Separator J-34505 on all front ball joints. Ball Joint Separator J 34505 is still
required to separate the rear suspension ball joint from the knuckle on the models listed above.