LeSabre V6-181 3.0L (1986)
FIGURE 4
5.
Remove quarter module screws (6) (See Figure 4).
6.
Cut out quarter window using a curved blade tile knife and/or utility knife and cut urethane bond between quarter module and pinch-weld flange,
staying as close to the pinch-weld flange as possible. The use of soapy water in some cases, and multiple shallow cuts will aid in removal.
7.
Remove and replace drip scalp molding and retainer.
8.
Clean urethane from window opening.
9.
Clean urethane from module.
10.
Apply primer to pinch weld.
11.
Apply urethane to module.
12.
Install glass and screws.
13.
Reinstall moldings and trim.
WARRANTY INFORMATION
Labor Operation
Labor
Number
Time
Remove and Replace Scalp
B7610 (right)
.5 Hour
Molding
B7611 (left)
.5 Hour
ADD:
To remove and install quarter window (each side) 1.8 Hours
