LeSabre V6-231 3.8L VIN 3 SFI (1988)
Fluid Level Sensor Switch
Fluid Level Sensor Switch
- Remove electrical connector from fluid level sensor switch.
- Remove fluid level sensor switch using needle nose pliers to compress switch locking tabs at inboard side of master cylinder.
Proportioner Valve Assemblies
Proportioner Valve Assemblies
- Remove proportioner valve assemblies.
- Remove "0" rings.
CAUTION:Do not damage piston or cylinder wall.
5. Depress primary piston and remove retainer.
CAUTION:Do not direct compressed air into proportioners (2 or 4), to remove piston assemblies since this will damage proportioners.
6. While directing low pressure compressed air into top outlet port at blind end of bore (all other outlet ports plugged), remove primary and
secondary pistons.
7. Remove spring retainer and seals from secondary piston.