LeSabre V6-231 3.8L VIN 3 SFI (1988)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Replacement
Fig. 1 Wheel Speed Sensor Cable Routing and Connections
REMOVAL:
1.
Disconnect the sensor-to-wiring harness electrical connector
^ Front sensor connectors are located in the engine compartment (near the strut towers).
^ Rear sensor connectors are located inside or outside the trunk (near the wheel wells).
2.
Gain access to the sensor mounting at the wheel. This may involve:
^ Removing the wheel/tire assembly