LeSabre V6-231 3.8L VIN 3 SFI (1988)
Control Module HVAC: Service and Repair
Programmer
Programmer Assembly
REMOVE OR DISCONNECT
1. Negative battery cable.
2. RH sound insulator.
3. Instrument Panel (I/P) compartment (glove box).
4. Screw securing shield, and shield.
5. Temperature valve link rod.
6. Electrical and vacuum connectors.
7. Programmer screws and programmer.
ADJUST
Before connecting temperature valve link rod during installation, do "Temperature Valve Link Adjustment" procedure. Refer to procedure under
Adjustments. See: Adjustments
INSTALL OR CONNECT
1. Programmer and mounting screws.
2. Electrical and vacuum connectors.
3. Temperature valve link.
4. Shield and securing screw.
5. I/P compartment (glove box).
6. RH sound insulator.