LeSabre V6-231 3.8L VIN C SFI (1990)
Paint: By Symptom
Campaign - Paint Flaking or Chipping
Bulletin 90-POL-1
Date Oct., '90
Ref. No.
Corp. Ref. No.
SUBJECT:
EXTERIOR PAINT ADHESION
MODELS AFFECTED: 1990 LESABRE
CONDITION:
A durability feature on 1990 Buick LeSabre model is a chip resistant material applied to the lower portion of the car body, which is then covered by the
car's paint finish. We have found that on some of these cars, the adhesion between the two materials may be inadequate. On the affected cars, this
condition may result in flaking or chipping of the paint finish, from these lower portions of the car's body.
VEHICLES INVOLVED:
Involved are certain 1990 Buick LeSabre models within the following VIN breakpoints:
Through
Plant
Beginning
And Including
Buick City
LH472600
LH488900
OWNER NOTIFICATION
Owners of vehicles involved in this Special Policy will be notified by Buick Motor Division. See copy of owner letter included with this bulletin.
SPECIAL POLICY ADJUSTMENT
General Motors will refinish all areas of the lower portion of the vehicle body in which the chip resistant material was applied should those areas exhibit
excessive chipping or flaking of the basecoat/clearcoat finish.
This Special Policy covers both materials and labor for a period of three
(3) years from the date the vehicle was originally placed in service, regardless of mileage.
This "Special Policy Adjustment Bulletin" should be filed in the 3-ring binder furnished to the dealer by General Motors.