LeSabre V6-231 3.8L VIN C SFI (1990)
Paint: By Symptom
Service Procedure:
1. Remove the basecoat/clearcoat from areas shown in illustrations. In some cases, the basecoat/clearcoat can be effectively removed by using a tape
and pull method or an air hose to blow it away from the chip resistant material.
NOTE:
Every effort should be made to leave as much of the chip resistant material as possible. Therefore, removal of the basecoat/clearcoat
by sanding should be done very carefully, using 400 paper and finishing with 600 paper.
2. Solvent wipe and tack-off area.
3. Refinish areas by using recommended basecoat/clearcoat application procedures specified for the materials being used.
The following materials or their equivalent are recommended:
PPG/Ditzler
DP Epoxy Primer
PPG/Ditzler
DBU Basecoat
PPG/Ditzler
Concept 2001 Clearcoat
