LeSabre V6-231 3.8L VIN C SFI (1990)
in).
4. Rear spark plug wires.
5. Throttle body and adapter to intake manifold.
6. Lubricate throttle body coolant pipe seal with antifreeze and connect to intake manifold.
7. EGR adapter and valve to throttle body adapter, then the EGR pipe.
8. Vacuum hoses and electrical connectors to intake manifold.
9. Throttle cable bracket from throttle body and air inlet duct.
10
Upper radiator hose, heater pipe (lubricate heater pipe O-ring seal with antifreeze) and coolant bypass hose.
11. Power steering pump braces.
12. Alternator, brace and drive belt.
13. Connect fuel lines from fuel rail.
14. Fill cooling system.
15. Negative battery cable.