LeSabre V6-231 3.8L VIN C SFI (1990)
NOTE:
Use the seal "handle" to guide the seal into place and then tap the "handle" lightly to disengage the "handle" from the seal. Using the
"handle" as a wedge, drive it between the cap and block behind the seal. This will wedge the seal against the block. (See Section A-A and
View B)
-
New Rear Main Seal (1990-92 3800 TPI)
-
Oil Pan
-
Flywheel (1990-92 3800 TPI)
