LeSabre V6-231 3.8L VIN C SFI (1990)
4. Four electrical connections and relay bracket assembly.
5. Accumulator to condenser hose.
6. Electrical connector from pressure cycling switch.
7. Evaporator outlet line from accumulator.
8. Accumulator bracket and accumulator; install sealing caps.
9. Evaporator tube (condenser to evaporator).
10. Power steering pump and position aside.
11. Vacuum tank.
12. Blower motor including electrical connection and cooling tube.
13. Exhaust manifold heat shield.
14. Drain cooling system.
15. Heater hoses from heater core.
16. Blower motor resistor.
17. Evaporator outlet line and support bracket.
18. Right sound insulator.
19. Floor air outlet duct.
20. Evaporator and blower module bolts (5) from under Instrument Panel (I/P) (behind-carpet).
21. Hoist vehicle.
22. Lower evaporator and blower module bolts (3).
23. Cut rubber blower barrier along guide line (molded into barrier).
24. Lower vehicle.
25. Upper evaporator and blower module bolts (7).
26. Finish cutting rubber barrier along guide lines (molded into barrier).
27. Screws from evaporator cover.
28. Evaporator from module.
