buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Seat Occupant Sensor > < Vacuum Restrictor HVAC|Locations
Page 1
background image

Air Bag(s) Arming and Disarming: Service and Repair

1.

Turn ignition switch to Lock position.

2.

Disconnect and tape end of battery ground cable. Wait 15 minutes before proceeding to step 3.

3.

Remove three of four inflatable module to steering wheel attaching screws.

4.

Support module, carefully remove fourth screw, then disconnect and tape module electrical connector.

Seat Occupant Sensor > < Vacuum Restrictor HVAC|Locations