LeSabre V6-231 3.8L VIN C SFI (1990)
COMPONENTS/STEERING/COMPONENT REPLACEMENT AND REPAIR PROCEDURES/TURN SIGNAL SWITCH procedure.
2.
Refer to Figs. 3 through 5, to remove ignition and dimmer switches.
3.
Refer to Fig. 6 to disconnect dimmer switch from bulkhead connector.
4.
When installing dimmer switch, depress switch slightly to install a 3/32 inch twist drill. Force switch upward to remove lash and tighten retaining
screw.
5.
Rearm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.
